5 git Collaboration and Conflict Management

5.1 Learning Objectives

In this lesson, you will learn:

  • How to use Git and GitHub to collaborate with colleagues on code
  • What typically causes conflicts when collaborating
  • Workflows to avoid conflicts
  • How to resolve a conflict

5.2 Introduction

Git is a great tool for working on your own, but even better for working with friends and colleagues. Git allows you to work with confidence on your own local copy of files with the confidence that you will be able to successfully synchronize your changes with the changes made by others.

The simplest way to collaborate with Git is to use a shared repository on a hosting service such as GitHub, and use this shared repository as the mechanism to move changes from one Collaborator to another. While there are other more advanced ways to sync git repositories, this “hub and spoke” model works really well due to its simplicity.

In this model, the Collaborator will clone a copy of the Owner’s repository from GitHub, and the Owner will grant them Collaborator status, enabling the Collaborator to directly pull and push from the Owner’s GitHub repository.

5.3 Collaborating with a trusted colleague without conflicts

We start by enabling collaboration with a trusted colleague. We will designate the Owner as the person who owns the shared repository, and the Collaborator as the person that they wish to grant the ability to make changes to their repository. We start by giving that person access to our GitHub repository.

Setup

  • We will break you into pairs, so choose one person as the Owner and one as the Collaborator
  • Log into GitHub as the `Owner
  • Navigate to the Owner’s training repository (e.g., training_jones)

Then, have the Owner visit their training repository created earlier, and visit the Settings page, and select the Manage access screen, and add the username of your Collaborator in the box.

Once the Collaborator has been added, they should check their email for an invitation from GitHub, and click on the acceptance link, which will enable them to collaborate on the repository.

We will start by having the Collaborator make some changes and share those with the Owner without generating any conflicts, In an ideal world, this would be the normal workflow. Here are the typical steps.

5.3.1 Step 1: Collaborator clone

To be able to contribute to a repository, the Collaborator must clone the repository from the Owner’s GitHub account. To do this, the Collaborator should visit the GitHub page for the Owner’s repository, and then copy the clone URL. In R Studio, the Collaborator will create a new project from version control by pasting this clone URL into the appropriate dialog (see the earlier chapter introducing GitHub).

5.3.2 Step 2: Collaborator Edits

With a clone copied locally, the Collaborator can now make changes to the index.Rmd file in the repository, adding a line or statement somewhere noticeable near the top. Save your changes.

5.3.3 Step 3: Collaborator commit and push

To sync changes, the Collaborator will need to add, commit, and push their changes to the Owner’s repository. But before doing so, it’s good practice to pull immediately before committing to ensure you have the most recent changes from the Owner. So, in RStudio’s Git tab, first click the “Diff” button to open the Git window, and then press the green “Pull” down arrow button. This will fetch any recent changes from the origin repository and merge them. Next, add the changed index.Rmd file to be committed by clicking the checkbox next to it, type in a commit message, and click “Commit”. Once that finishes, then the Collaborator can immediately click ‘Push’ to send the commits to the Owner’s GitHub repository.

5.3.4 Step 4: Owner pull

Now, the Owner can open their local working copy of the code in RStudio, and pull those changes down to their local copy.

Congrats, the Owner now has your changes!

5.3.5 Step 5: Owner edits, commit, and push

Next, the Owner should do the same. Make changes to a file in the repository, save it, pull to make sure no new changes have been made while editing, and then add, commit, and push the Owner changes to GitHub.

5.3.6 Step 6: Collaborator pull

The Collaborator can now pull down those Owner changes, and all copies are once again fully synced. And you’re off to collaborating.

Challenge

Now that the instructors have demonstrated this conflict-free process, break into pairs and try the same with your partner. Start by designating one person as the Owner and one as the Collaborator, and then repeat the steps described above:

  • Step 0: Setup permissions for your Collaborator
  • Step 1: Collaborator clones the Owner repository
  • Step 2: Collaborator edits the README file
  • Step 3: Collaborator commits and pushes the file to GitHub
  • Step 4: Owner pulls the changes that the Collaborator made
  • Step 5: Owner edits, commits, and pushes some new changes
  • Step 6: Collaborator pulls the Owners changes from GitHub

XKCD 1597

5.4 Merge conflicts

So things can go wrong, which usually starts with a merge conflict, due to both collaborators making incompatible changes to a file. While the error messages from merge conflicts can be daunting, getting things back to a normal state can be straightforward once you’ve got an idea where the problem lies.

A merge conflict occurs when both the Owner and Collaborator change the same lines in the same file without first pulling the changes that the other has made. This is most easily avoided by good communication about who is working on various sections of each file, and trying to avoid overlaps. But sometimes it happens, and Git is there to warn you about potential problems. And Git will not allow you to overwrite one person’s changes to a file with another’s changes to the same file if they were based on the same version.

The main problem with merge conflicts is that, when the Owner and Collaborator both make changes to the same line of a file, Git doesn’t know whose changes take precedence. You have to tell Git whose changes to use for that line.

5.5 How to resolve a conflict

Abort, abort, abort…

Sometimes you just made a mistake. When you get a merge conflict, the repository is placed in a ‘Merging’ state until you resolve it. There’s a terminal command to abort doing the merge altogether:

git merge --abort

Of course, after doing that you still haven’t synced with your Collaborator’s changes, so things are still unresolved. But at least your repository is now usable on your local machine.

Checkout

The simplest way to resolve a conflict, given that you know whose version of the file you want to keep, is to use the command line Git program to tell Git to use either your changes (the person doing the merge), or their changes (the other Collaborator).

  • keep your Collaborator’s file: git checkout --theirs conflicted_file.Rmd
  • keep your own file: git checkout --ours conflicted_file.Rmd

Once you have run that command, then run add, commit, and push the changes as normal.

Pull and edit the file

But that requires the command line. If you want to resolve from RStudio, or if you want to pick and choose some of your changes and some of your Collaborator’s, then instead you can manually edit and fix the file. When you pulled the file with a conflict, Git notices that there is a conflict and modifies the file to show both your own changes and your Collaborator’s changes in the file. It also shows the file in the Git tab with an orange U icon, which indicates that the file is Unmerged, and therefore awaiting your help to resolve the conflict. It delimits these blocks with a series of less than and greater than signs, so they are easy to find:

To resolve the conflicts, simply find all of these blocks, and edit them so that the file looks how you want (either pick your lines, your Collaborator’s lines, some combination, or something altogether new), and save. Be sure you removed the delimiter lines that started with <<<<<<<, =======, and >>>>>>>.

Once you have made those changes, you simply add, commit, and push the files to resolve the conflict.

5.5.1 Producing and resolving merge conflicts

To illustrate this process, we’re going to carefully create a merge conflict step by step, show how to resolve it, and show how to see the results of the successful merge after it is complete. First, we will walk through the exercise to demonstrate the issues.

5.5.1.1 Owner and Collaborator ensure all changes are updated

First, start the exercise by ensuring that both the Owner and Collaborator have all of the changes synced to their local copies of the Owner’s repository in RStudio. This includes doing a git pull to ensure that you have all changes local, and make sure that the Git tab in RStudio doesn’t show any changes needing to be committed.

5.5.1.2 Owner makes a change and commits

From that clean slate, the Owner first modifies and commits a small change including their name on a specific line of the README.md file (we will change line 4). Work to only change that one line, and add your username to the line in some form and commit the changes (but DO NOT push). We are now in a situation where the Owner has unpushed changes that the Collaborator can not yet see.

5.5.1.3 Collaborator makes a change and commits on the same line

Now the Collaborator also makes changes to the same (line 4) of the README.md file in their RStudio copy of the project, adding their name to the line. They then commit. At this point, both the Owner and Collaborator have committed changes based on their shared version of the README.md file, but neither has tried to share their changes via GitHub.

5.5.1.4 Collaborator pushes the file to GitHub

Sharing starts when the Collaborator pushes their changes to the GitHub repo, which updates GitHub to their version of the file. The Owner is now one revision behind, but doesn’t know it yet.

5.5.1.5 Owner pushes their changes and gets an error

At this point, the Owner tries to push their change to the repository, which triggers an error from GitHub. While the error message is long, it basically tells you everything needed (that the Owner’s repository doesn’t reflect the changes on GitHub, and that they need to pull before they can push).

5.5.1.6 Owner pulls from GitHub to get Collaborator changes

Doing what the message says, the Owner pulls the changes from GitHub, and gets another, different error message. In this case, it indicates that there is a merge conflict because of the conflicting lines.

In the Git pane of RStudio, the file is also flagged with an orange U, which stands for an unresolved merge conflict.

5.5.1.7 Owner edits the file to resolve the conflict

To resolve the conflict, the Owner now needs to edit the file. Again, as indicated above, Git has flagged the locations in the file where a conflict occurred with <<<<<<<, =======, and >>>>>>>. The Owner should edit the file, merging whatever changes are appropriate until the conflicting lines read how they should, and eliminate all of the marker lines with <<<<<<<, =======, and >>>>>>>.

Of course, for scripts and programs, resolving the changes means more than just merging the text – whoever is doing the merging should make sure that the code runs properly and none of the logic of the program has been broken.

5.5.1.8 Owner commits the resolved changes

From this point forward, things proceed as normal. The Owner first ‘Adds’ the file changes to be made, which changes the orange U to a blue M for modified, and then commits the changes locally. The Owner now has a resolved version of the file on their system.

5.5.1.9 Owner pushes the resolved changes to GitHub

Have the Owner push the changes, and it should replicate the changes to GitHub without error.

5.5.1.10 Collaborator pulls the resolved changes from GitHub

Finally, the Collaborator can pull from GitHub to get the changes the Owner made.

5.5.1.11 Both can view commit history

When either the Collaborator or the Owner view the history, the conflict, associated branch, and the merged changes are clearly visible in the history.

Merge Conflict Challenge

Now it’s your turn. In pairs, intentionally create a merge conflict, and then go through the steps needed to resolve the issues and continue developing with the merged files. See the sections above for help with each of these steps:

  • Step 0: Owner and Collaborator ensure all changes are updated
  • Step 1: Owner makes a change and commits
  • Step 2: Collaborator makes a change and commits on the same line
  • Step 3: Collaborator pushes the file to GitHub
  • Step 4: Owner pushes their changes and gets an error
  • Step 5: Owner pulls from GitHub to get Collaborator changes
  • Step 6: Owner edits the file to resolve the conflict
  • Step 7: Owner commits the resolved changes
  • Step 8: Owner pushes the resolved changes to GitHub
  • Step 9: Collaborator pulls the resolved changes from GitHub
  • Step 10: Both can view commit history

5.6 Workflows to avoid merge conflicts

Some basic rules of thumb can avoid the vast majority of merge conflicts, saving a lot of time and frustration. These are words our teams live by:

  • Communicate often
  • Tell each other what you are working on
  • Pull immediately before you commit or push
  • Commit often in small chunks.

A good workflow is encapsulated as follows:

Pull -> Edit -> Add -> Pull -> Commit -> Push

Always start your working sessions with a pull to get any outstanding changes, then start doing your editing and work. Stage your changes, but before you Commit, Pull again to see if any new changes have arrived. If so, they should merge in easily if you are working in different parts of the program. You can then Commit and immediately Push your changes safely. Good luck, and try to not get frustrated. Once you figure out how to handle merge conflicts, they can be avoided or dispatched when they occur, but it does take a bit of practice.